Recoverable Anchor Screw

Recoverable Conical Anchor Screws are usually used for Single Side Formwork, Climbing and Tunnel Formwork applications.PRPJECTSThis type of anchor screws ara usually used in construction sites such of dams, hydroelectrical plants, viaducts and bridges, high buildings and support walls.RECOVERABLERecoverable anchors are known as ‘carrot anchor’ in t

Climbing Cone

The climbing cone is positioned by using positioners and then concrete is applied. After then, positioners and the formwork is replaced by climbing cone. By the stationary anchor left inside a realiable replacement is made. Then the climbing bracket is placed on. Article No. Bar Q (mm) Q1/Q2 (mm) Length (mm) Hex (mm) Weight (kg/pc) CF-D15 15 28/32

Climbing Cone

It is another system designed to be used for climbing formwork systems. In this system, the stop anchors stays in the concrete, while the conical portion is removed. As in the other systems, the positions of the climbing cones are adjusted by positioning disks and then cement is applied. Then, the positioning disk is replaced by climbing ring. The

Ras Positioning Disk

Positioning disk is used to position the anchor. They are placed to different places on the formwork by using nails and used to position the anchor before cement application. Atricle No. Anchor (mm) Q (mm) Length (mm) Hex1 (mm) Weight (kg/pc) M24 CF D15/P M24 60 40 12 0,15 M30 CF D20/P M30 60 40 12 0,35 M36 CF D26/P M36 70 40 14 0,4

Recoverable Anchor Extractor Key

The Extractor key is manufactured from special hardened steel for a long term use. Special design of the key is for easy and harmless use. Atricle No. Therad Key Weight (kg) RAS-KEYM20 M20 1,3 RAS-KEYM24 M24 1,7 RAS-KEYM30/M36 M30/M36 2,2

Self Anchor Cone

The advantage of this product is the low price. Self anchor cone can be applied to the concrete by only using a single nut. When the anchor is removed by its special key, only the nut is leaved in concrete. Atricle No. Bar Q (mm) Q1/Q2 (mm) Length (mm) Key (mm) Weight (kg/pc) RAS - 15 F 4050 M24/D15 40/50 150 31 1,1 RAS - 20 F 4060 M30/D20 46/60 15

Recoverable Anchor Screw Tension Test

This report is prepared to determine the tensile strength of recoverable anchor screws of various sizes. In this context, a consultancy agreement (No: 2015.03.03.1.00.49) signed between METU (Middle East Technical University) and Umut Machinery Industry. Prof. Dr. Erdem Canbay, from the Department of Civil Engineering of METU conducted the tension

Ras Dywidag Systems

It is a special design to be used for different applications. Both Metric and inch Tierod can be on the anchors. Article No. Anchor (mm) / DYWIDAG Q (mm) Length (mm) Weight (kg) RAS-M24/DW 15X160 M24/DW15 49 160 1,2 RAS-M24/DW 15X200 M24/DW15 49 200 1,6 RAS-M24/DW 15X300 M24/DW15 49 300 1,95 RAS-M30/DW 20X400 M30/DW20 59 400 3,8 RAS-M30/DW 20X430 M

Positioning Cone

It is used for positioning climbing hangers. By using the tie rod attached it is sink into the concrete. After then they are removed by triangle key an replaced by climbing hangers. POSITIONING CONE Article No. Bar Q (mm) Q1/Q2 (mm) Lenght (mm) Key (mm) Weight (kg/pc) RAS- 15 F 3073 M24/D15 30/43 100 30 0,6 RAS- 20 F 3073 M27/D20 33/46 130 33 0,81

Sleeve For Steel Cone

Sleeves are put on the steel cones to remove them easily. Article No. For Cone Length (mm) Q1/Q2 (mm) Weight (kg/pc) RAS- 15 F 3034/S M24/D15 98 29/41 0,01 RAS- 20 F 3034/S M30/D20 128 41/61 0,01 RAS- 26 F 3034/S M36/D26 148 41/61 0,01

Positioning Cone Spanner

Used to dismantle place holders. Article No. Bar Q (mm) Lenght (mm) Hex1 (mm) Weight (kg) PS-M24/D15 15 80 30 0,3 PS-M27-M33/D26 20/26 90 36 0,45

Stop Anchor

Steel Cone

Steel cones are usually used in waterproof concrete wall constructions. The anchor is stationary and reliable, the cones are removable. Only the anchor plate and the tie rod is left in the concrete. Article No. Bar Q (mm) Q1/Q2 (mm) Length (mm) Hex (mm) Weight (kg/pc) 15 F 3034 15 28/40 100 30 1 15 F 3034/1 15 30/50 125 36 1,1 20 F 3034 20 40/60 13

Climbing Ring

By using a bolt, it is attached to the cones used in climbing formworks to provide the climbing bracket to sit on the pulley safely. Article No. Bar Q (mm) Q1/Q2 (mm) Lenght (mm) Weight (kg/pc) RING-M20/31 M20 31/70 70 0,7 RING-M24/35 M24 35/70 70 0,7 RING-M30/50 M30 50/90 55 1,4 RING-M35/55 M36 55/100 90 2,3

Formwork Clamping Rod

It is used for formwork tensioning and adjustment. Article No. Bar Q (mm) Lenght (mm) Hex (mm) Weight (kg/pc) RAS 24 FC 250 M24 250 27 1,6 RAS 24 FC 350 M24 350 27 1,9 RAS 24 FC 500 M24 500 27 2,6

Tierod Connector

Used to connect the rods of the tie rods. The tests made show that the material used is suitable and they have a long life cycle. Article No. Bar Q (mm) Lenght (mm) Hex (mm) Weight (kg/pc) HXN-DW15 15 100 30 0,4 HXN-DW20 20 120 36 0,8 HXN-DW26 26 120 46 1,2

Hexagon Nut

Tie rod nuts are usually manufactured from the materials suiatable for welding. They are used by welding on soma special plates and formworks. Article No. Bar Q (mm) Lenght (mm) Hex (mm) Weight (kg/pc) HXN-DW15 15 30 30 0,15 HXN-DW15 15 50 30 0,25 HXN-DW15 15 60 30 0,3 HXN-DW20 20 50 36 0,35 HXN-DW20 20 70 36 0,41 HXN-DW26 26 50 46 0,55 HXN-DW26 26

Tierod Nut

It is manufactured by forging for a long term use. It is used in many places of formwork attachments. Since its material is forging, it can be used many times